I-Handan Double Blue Fastener

Yellow Zinc camera Wedge Anchor

Yellow Zinc camera Wedge Anchor

Usetyenziso:

Ukufumana amandla athembekileyo kunye nokuqiniswa okukhulu, kuyimfuneko ukuqinisekisa ukuba iringi ye-clamp efakwe kwi-gecko yandiswa ngokupheleleyo.Kwaye i-clamp yokwandisa kufuneka ingawi kwintonga okanye ijike okanye igxumeke emngxunyeni.


  • I-DIN:M6 M8 M10 M12 M14 M16 M18 M20 M24
  • ANSI:1/2 1/4 3/4 3/8 5/8 5/16 1”
  • Unyango lomphezulu:WZP YZP HDG
  • Iinkcukacha zeMveliso

    Iithegi zeMveliso

    Iimpawu zeMveliso

    Le mveliso ineentambo ezinde kwaye kulula ukuyifaka.Ihlala isetyenziswa kufakelo olunzima.
    Ukufumana amandla athembekileyo kunye nokuqiniswa okukhulu, kuyimfuneko ukuqinisekisa ukuba iringi ye-clamp efakwe kwi-gecko yandiswa ngokupheleleyo.Kwaye i-clamp yokwandisa kufuneka ingawi kwintonga okanye ijike okanye igxumeke emngxunyeni.
    Amaxabiso oxinzelelo olulinganisiweyo avavanyiwe onke phantsi kweemeko zamandla e-samente ye-260 ~ 300 kgs / cm2, kwaye ixabiso eliphezulu lomthwalo wokhuseleko akufanele lidlule i-25% yexabiso elilinganisiweyo.

    Indawo yesicelo

    Ifaneleka kwikhonkrithi kunye nelitye lendalo elixineneyo, izakhiwo zetsimbi, iiprofayili zetsimbi, iiplati zomgangatho, iiplate zokuxhasa, izibiyeli, iintsimbi, iifestile, iindonga zamakhethini, oomatshini, imiqadi, imiqadi, izibiyeli, njl.

    Izinto eziphathekayo

    Intsimbi yekhabhoni

    Idatha yoBugcisa

    Ubungakanani

    Gqoka umngxuma

    Uluhlu lobude

    Yila amandla okuzoba

    Amandla okugqibela

    Dseign amandla okucheba

    Amandla okugqibela okucheba

    M6

    6

    40-120

    5

    9.7

    --

    --

    M8

    8

    50-220

    8

    16

    6

    9

    M10

    10

    60-250

    12

    24

    8

    14

    M12

    12

    70-400

    18

    33

    18

    29

    M14

    14

    80-200

    20

    44

    22

    37

    M16

    16

    80-300

    22

    51.8

    26

    45

    M18

    18

    100-300

    28

    58

    28

    57

    M20

    20

    100-400

    35

    70

    31

    62

    M24

    24

    12-400

    50

    113

    45

    88

    1/4

    1/4 (6.35mm)

    45-200

    5

    9.7

    --

    --

    5/16

    5/16 (8mm)

    50-220

    8

    16

    6

    9

    3/8

    3/8 (10mm)

    60-250

    12

    24

    8

    14

    1/2

    1/2 (12.7mm)

    70-400

    18

    33

    18

    29

    5/8

    5/8 (16mm)

    80-200

    20

    44

    22

    37

    3/4

    3/4 (19.5mm)

    80-300

    22

    51.8

    26

    45

    1"

    1" (25.4mm)

    100-300

    28

    58

    28

    57

    Ingcaciso yeMveliso

    UKULAHLA KWI-ANKOR luhlobo lweankile eyenzelwe ukusetyenziswa kwikhonkrithi okanye kwezinye izinto eziqinileyo.Ifakwe emngxunyeni owenziwe ngaphambili kwaye iyanda xa i-bolt ifakwe, idala ukubamba okukhuselekileyo.

    Iimpawu zeMveliso

    Yenziwe ngezixhobo eziphezulu zokuqina kokuqina
    Yenzelwe ukuba ifakwe ngokukhawuleza kwaye kulula
    Ifumaneka kuluhlu lweesayizi kunye neentlobo zentambo ukulungiselela ubungakanani bebholt ezahlukeneyo

    IiNzuzo zeMveliso

    Inika indawo ye-anchor ekhuselekileyo nethembekileyo kwimithwalo enzima
    Ingasetyenziswa kwizicelo ezahlukeneyo, kubandakanya ukwakhiwa, ukwenziwa, kunye nokugcinwa ngokubanzi
    Kulula ukuyifaka, ifuna kuphela umngxuma owenziwe ngaphambili kunye nebholithi

    Izicelo zeMveliso

    Isetyenziswe kwikhonkrithi nakwezinye izinto eziqinileyo ukumisa izixhobo ezinzima, oomatshini kunye nezinye izinto
    Isetyenziswa ngokuqhelekileyo kwiiprojekthi zokwakha ze-anchoring yentsimbi yesakhiwo, i-metal framing, kunye nezinye izinto zokwakha
    Ilungele ukusetyenziswa kwizityalo zokuvelisa, apho izixhobo ezinzima kunye noomatshini kufuneka baqiniswe ngokukhuselekileyo.

    Ukufakwa kweMveliso

    Gqoka umngxuma kwikhonkrithi okanye kwezinye izinto eziqinileyo usebenzisa i-hammer drill okanye esinye isixhobo esifanelekileyo.
    Faka i-DROP KWI-ANCHOR emngxunyeni, uqinisekise ukuba igungxulwe nomphezulu.
    Faka ibholithi kwi-ankile kwaye uqinise kwi-torque oyifunayo usebenzisa i-torque wrench okanye esinye isixhobo esifanelekileyo.

    Eminye imixholo efanelekileyo

    I-DROP IN ANCHORS ivame ukwenziwa kwizinto ezifana nensimbi engenasici okanye i-zinc-plated steel ukumelana ne-corrosion kunye nokuqinisekisa ukusebenza okuhlala ixesha elide.
    Kubalulekile ukukhetha ubungakanani obuchanekileyo kunye nodidi lwentambo ye-DROP IN ANCHOR kwisicelo sakho esithile ukuqinisekisa ukubamba okukhuselekileyo.
    I-AROP IN ANHORS ziyilelwe ukuba zisetyenziswe kwikhonkrithi okanye kwezinye izinto eziqinileyo kuphela kwaye akufanele zisetyenziswe kwizinto ezithambileyo okanye ezibuthathaka.


  • Ngaphambili:
  • Okulandelayo:

  • Bhala umyalezo wakho apha kwaye uwuthumele kuthi

    Qhagamshelana nathi ukufumana eyona quotation

    Ingcali yasekhaya iqeshe itekhnoloji ephezulu yasekhaya, ekubunjweni kwehexagon, ukuchetywa, ukuqengqeleka kwentambo, i-carburize, i-zinc plated, umatshini wokuhlamba, iphakheji kunye nezinye iinkqubo, lonke ikhonkco lizabalazela ukugqibelela kunye nokugqwesa.
    qhagamshelana nathi